We use cookies to enhance your experience on our website. By clicking '' or by continuing to use our website, you are agreeing to our use of cookies. You can change your cookie settings at any time.
Heat and cool your home with a versatile system that’s powered by electricity. Heat pumps work best in moderate climates, and help keep you comfortable while lowering your carbon footprint.
What to look for: Energy efficiency, noise level, and heating and cooling stages
Showing results for
Not sure what youneed?
Answer some questions about your home and preferences and we’ll help you find the system that matches your needs.
System Recommendation ToolReach out toadealer
Your local dealer can work with you to decide what products are best for your home.
Contact a dealerThere are no products that meet this criteria; please broaden your filters to see products
How much can you save?
Upgrading your system to a higher SEER rating can help you save on your monthly energy costs. Lower energy usage can also help protect the environment for futuregenerations.
*The majority of systems installed prior to 2006 are 10 SEER or lower. For this example, the air conditioner has a SEER rating of up to 20 SEER. Potential energy savings may vary depending on your lifestyle, system settings, equipment maintenance, local climate, home construction and installation of equipment and duct system.
**Savings based on national averages.
*The majority of systems installed prior to 2006 are 10 SEER or lower. For this example, the air conditioner has a SEER rating of up to 20 SEER. Potential energy savings may vary depending on your lifestyle, system settings, equipment maintenance, local climate, home construction and installation of equipment andductsystem.
**Savings based on national averages.
Support Resources
Find guides to help you set up and use your smart thermostat and Trane Home account.
Getting Started Guide
Learn helpful HVAC tips and tricks before you purchase your system.
Visit the Getting Started Guide
Owner’s Manuals
Learn more about your product, like its technical specs and innovative technology.
Find your manual
Get helpful HVAC tips in our newsletter
Sign up for our email newsletter to learn helpful HVAC tips and tricks before your purchase your system.
Heat Pump FAQs
A heat pump is an HVAC system that uses electricity to heat and cool your home. In the summer, heat pumps act as air conditioners by transporting heat from inside your home, outside. In the winter, heat pumps take heat from outside and deposit it into your home. That means, heat pumps can heat your home when it’s cold outside, and cool your home as temperatures rise.
If you’re facing an issue with your current heat pump, our Repair or Replace tool can help you determine the best next step for your home. If your heat pump is less than 10 years old and repairs are minor, you should generally opt for repair.
Generally speaking, replacement makes sense if your heat pump is over 10 years old, has a SEER2 or HSPF2 rating less than the Department of Energy minimum requirements, requires frequent repairs, or is the cause of increased energy costs.
SEER2, which stands for Seasonal Energy Efficiency Ratio, measures how efficiently your heat pump cools your home — the higher the SEER2, the more efficient your heat pump is at cooling.
Since the Department of Energy revised minimum SEER2 ratings for heat pumps, effective Jan. 1, 2023, there’s no magic number for a good SEER2 rating. Split system heat pumps must have a SEER2 of 14.3 or higher in all regions, and single-packaged air conditioners and heat pumps in all regions must have a SEER2 of 13.4 or higher. Talk to your local Trane dealer to help determine the best one for your home.
HSPF2, or Heating Seasonal Performance Factor, measures how efficiently your heat pump heats your home — the higher the HSPF2, the more efficient your heat pump is at heating. Effective Jan.1, 2023, the Department of Energy required all split-system heat pumps to have an HSPF2 rating of 7.5 or higher, and all single-packaged heat pumps to have an HSPF2 of 6.7 or higher.
However, these are just minimum ratings and the right HSPF2 rating for your heat pump depends on factors such as geographic location, home size, and more.
The biggest difference between an air source heat pump and a ductless (also known as mini-split) heat pump is the amount of space in which the system can control the temperature. A traditional heat pump is part of a central heating and cooling system, which means it utilizes ductwork to distribute newly warmed or cooled air throughout your entire home.
On the other hand, a mini-split heat pump does not use ductwork; instead, it heats and cools just the room or space where it was directly installed. If you do not have ductwork and need to heat or cool several rooms, an additional ductless option is the multi-zone ductless system. You control the temperature in each room separately from the rest.
When it comes to a heat pump vs. furnace, there are two big differences to keep in mind. First, a heat pump can both heat and cool your home, while a furnace only heats your home. Second, these two HVAC systems generate heat in different ways. While a furnace uses a fuel source like gas or oil to create heat, a heat pump uses electricity.
Your installed cost for a heat pump will vary depending on several factors, including heating and cooling capacity, SEER 2 and HSPF2 ratings, whether you’re replacing an existing heat pump, whether you’re replacing an AC/Furnace combo and other factors. For further information, check out our pricing guide.
An electric air source heat pump will last an average of 15 years. Some heat pumps can last longer if you ensure proper maintenance and they are quality units to begin with. Some heat pumps may not last as long if they are not properly maintained. Since you use a heat pump year-round for heating and cooling, maintenance is key. Get some maintenance tips to prolong the life of your heat pump.
As part of ongoing improvement, the HVAC industry is in the process of transitioning to using a new refrigerant in newly manufactured units, including air conditioners and heat pumps. It’s called R-454B and is more sustainable than the most recent refrigerant, R-410A.
For new units listed on our website, you will see an icon indicating which units are using the new refrigerant. You can also find the type of refrigerant listed in the model specifications.
For existing AC and heat pump installations at your home, your owner’s manual will say what type of refrigerant it uses. If the unit was manufactured in 2010 or later, the refrigerant will be R-410A. If it was manufactured before 2010, the refrigerant would be R-22, which is no longer in production. You may want to consider system replacement due to the age of the unit.
You can also contact your local Trane local dealer to learn more about refrigerants and product availability.
Read more about heat pumps
Explore more blog articles
About Trane5min read
Best Trane Heat Pumps for Your Home
November 2023
5min read
Heat Pump vs. Furnace: Which Heating System Is Right For You?
September 2023
6min read
5 Misconceptions About Heat Pumps
August 2023
Explore more blog articles
Contact a local dealer
Dealers can answer questions, help you find the right products for your home, and repair your system.
We’re here to help
Connect with our Customer Care team about your products, warranties, and dealer concerns.
Available Monday – Friday from 7am to 5pm CST
1-833-298-3493
A phone